Document Actions

XVME-6200 Intel® Core™2 Duo Processor Module

by tony Losey — last modified 2007-03-29 10:13

Overview

The XVME-6200 is a powerful VMEbus PC compatible processor module from Xembedded, the pioneer and leader in VMEbus PC technology.

The XVME-6200 VMEbus processor integrates an Intel® Core™ Duo or Core™ 2 Duo processor running in a range of 1.50GHz to 2.0 GHz with a PCI-to-VMEbus interface. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules.

Features

Single Slot 6U single board computer
Intel® 1.66GHz Core™ Duo , 2.0GHz Core Duo®, 1.5GHz Core™2 Duo processor with up to 4MB oflevel 2 cache, 667MHz FSB
Enhanced Intel® SpeedStep®
E7520 and 6300ESB chipset
VGA Graphics out front panel or rear video support (Pixel resolution up to 1600 X 1200 at 85Hz)
512MB, 1GB, 2GB, 4GB and 8GB of ECC DDR2,400MHz SDRAM Dual Channel
EIDE Ultra-100 DMA controller supports up to three IDE devices (compatible with XVME-977 and XVME-979 Mass Storage Modules)
Optional EIDE On-board 1.8” hard drive or optional Compact Flash carrier
Two Serial ATA150 (SATA150) external devices
Floppy disk interface (compatible with XVME-977)
Dual 10/100/1000BaseT out front or Vita 31.1 on optional P0 rear connector for in-rack Ethernet switch and fail over technology
One PMC/XMC 32/64-bit 33/66MHz site (IEEEP1386/P1386.1) with front panel I/O bezel and user I/O on optional P0 rear connector. XMC is PCIe x8.
PMC expansion for two to four additional PMC/XMC sites using the XVME-976-210/220

Headless operation using serial console mode including BIOS setup
Rear operation using USB keyboard/mouse and rear video options
VME-64 support with Tundra Universe IID A32/A24/A16/D64/D32/D16/D8, MBLT64 and fast hardware byte-swapping
Parallel Printer Port (ECP, EPP and IEEE1284)
USB 2.0 Ports, two on front two out rear connector
Three serial ports (BIOS selectable)

Long duration watchdog timer
Front panel reset switch and status LEDs
Audio - line level stereo input and output
Software support Libraries for Windows 2000, Windows XP, Windows Vista , Windows XP Embeded RTX, Linux , QNX , VxWorks and MS-DOS( others available on request)
Optional IEEE1101.10 (VME64x Compact PCI type) handles available at order time.

CPU

- Three CPU versions available
1.66GHz Intel® Core™ Duo processor L2400
2.0Hz Intel® Core™ Duo processor T2500
1.50Hz Intel® Core™ Duo processor L7400

Memory (dual Channel memory)

- 512Mb, 1Gb, 2Gb, 4GB and 8GB memory sizes available using two 200-pin, 400MHz ECC DDR2 Memory

Mass Storage

EIDE Ultra-DMA 100 interface-
- Two channels via P2 use with our XVME-977/979 or XVME-990(RTM) Modules
- One channel on-board for optional 1.8” EIDE or our Compact Flash carrier
- Two Serial ATA150 channels via P2
- Floppy Drive interface via P2 use with our XVME- 977/979 or XVME-990(RTM) Modules

Graphics Interface

- Silicon Motion SM722 2D/3D graphics Controller
- Resolutions up to 1280X1024 at up to 16M colors
- Analog video via front panel or P2 and XVME-990(RTM) Module

Ethernet

- Using Intel® 82571EB, dual 10/100/1000Mbps ports via the RJ-45 front panel or Vita 31.1 support out the P0

Stereo Audio

- AD1981B AC97 audio CODEC
- Line level stereo input and output via P2

Serial Ports

- One RS-232/422/485 (COM1) ports via front panel
- Two RS-232 (COM2 and Com3) port via P2 (XVME-990)

PMC/XMC Site

- One PMC site with I/O via front panel or optional P0 connector. 32/64-bit, 33/66MHz PCI operation
- Alternatively one XMC slot, XMC PCIe X8
- On board PMC/XMC site is 3.3V interface levels
- Use our XVME-976-210/-220 to expand to two sites,another XVME-976-210/220 for four PMC/XMC sites.
Two XVME-976-210/220’s can be stacked.

USB 2.0 (Universal Serial Bus)

- Two USB 2.0 port via front panel
- Two USB 2.0 ports via P2 connector

Keyboard and Mouse port
- Via front panel shared PS/2
PC-Compatible Real Time Clock

Parallel Port interface (ECP, EPP and IEEE1284) via P2

Long Duration Watchdog timer

Order Information

Industrial Temperature ( 0 to 55° )
XVME-6200/8YX 1.50GHz Intel® Core™ 2Duo CPU
XVME-6200/7YX 2.0GHz Intel® Core™ Duo CPU
XVME-6200/6YX 1.66GHz Intel® Core™ Duo CPU

Extended Temperature ( -25 to 70° )

XVME-6200/8YX 1.50GHz Intel® Core™2Duo CPU
XVME-6200/7YX 2.0GHz Intel® Core™ Duo CPU
XVME-6200/6YX 1.66GHz Intel®Core™ Duo CPU

Click Here For A Larger Image

VMEbus Interface

Using Tundra Universe II D

Complies with VMEbus Specification,VME-64X (ANSI/VITA 1.1-1997)
A32/A24/A16:D64/D32/D16/D08 (EO) DTB Master
A32/A24/A16:D64/D32/D16/D08 (EO) DTB Slave
R(0-3) Bus Requester
Interrupter I (1)-I(7) DYN
IH(1)-IH(7) Interrupt Handler
SYSCLK and SYSRESET Driver
PRI, SGL, RRS Arbiter
RWD, ROR bus release
Form factor: Double 233.7 mm X 160.0 mm (9.2” X 6.3”)

Electrical Specification

+5V@6.8A typical (using 1.50GHz Intel® Core ™2 Duo w/ 1Gb DRAM)
+/- 12V routed to PMC site only, not required for normal operation.

Environmental

RoHS Compliant module
Thermal Operating 0 to 55° **
Thermal Non-Operating -40 to 85°
Humidity Operating/Non-Operating 10-95% RH, non-condensing
Shock Operatin 30g Peak acceleration, 11mSec duration
Vibration 5-2KHz Operating0.015” (0.38 mm) Peak to Peakdisplacement, 5.0g max. acceleration
Altitude
Operating Sea level to 10K feet (3Km)
Non-Operating Sea level to 40K feet (12Km)

EMI/EMC

Emmisions EN 55022 Immunity EN 50082-2
NOTE: The XVME-6200 requires 300LFM of air flow during operation

Accessory Products

XVME-990/01 - Rear Transition Module used to connect external devices to the P2 and P0 connectors of the XVME-6200. Mounts on back side of the VMEbus chassis.
XVME-990/02 - Same as XVME-990/01 but without the P0 connector and 68-pin PMC I/O.
XVME-977 - Single slot mass storage module with 2.5” hard drive and 3.5” 1.44Mb floppy drive. Connects to the P2 of the XVME-6200 via a 96 pin ribbon cable.
XVME-979 - Single slot mass storage module with 2.5” hard drive and CD-ROM R/W drive. (optional DVD/CD-ROM R/W available). Connects to the P2 of the XVME-6200 via a 96 pin ribbon cable provided with the XVME-979.
XVME-976/210 - Single Slot dual PMC carrier module for use with the XVME-6200, provides two 32/64-bit/33/66MHz 3.3V or 5V PMC sites with front panel I/O cutout. Twocarriers can be stacked to provide a total of 5 PMC sites.
XVME-976/220 - Same as XVME-976-210 but includes the P0 for rear I/O.
XVME-912 - Compact Flash mounting kit for XVME-6200. (Flash module not included)
XVME-913 - On-Board 1.8” hard drive kit for XVME-6200.

Note: If the user backplane is only a 96-Pin J1/J2 VMEbus the I/O functions on the outer rows of the P1/P2 160-pin VMEbus connector from the XVME-6200 are not available via the rear transition module. All functions on the XVME-6200 P2 and P0 connectors are supported via connectors on the optional XVME-990 rear transition module. The optional P0 connector does not allow the XVME-6200 module to be inserted into some legacy (non VME 64X) chassis. To assure that your chassis supports this feature contact our Application Engineering group at 734.944.1942 or Email: support@xembedded.com

Y = 1 VME-64 IEEE 1101.0 handles (Standard VME type handles)	X =1 for 512MB ECC DRR2 SDRAM
Y = 2 VME-64x IEEE 1101.10 handles (cPCI type handles)	X = 2 for 1GB ECC DRR2 SDRAM
Y = 3 VME-64 IEEE 1101.0 handles and optional P0 (Vita 31.1 and PMC rear I/O)	X = 3 for 2GB ECC DRR2 SDRAM
Y = 4 VME-64x IEEE 1101.10 handles and optional P0 (Vita 31.1 and PMC rear I/O)	X = 4 for 4GB ECC DRR2 SDRAM
	X = 5 for 8GB ECC DRR2 SDRAM

Download This Page As A PDF

Xembedded, Inc. 710 N. Maple Rd. Saline, MI 48176
Ph. 877.944.1942 Fax 734.944.1999 See us at www.xembedded.com DS_746200 rev. E

Sections

Personal tools