TIP867
TIP867 8 Channel RS485 Serial Interface
|
|
| TIP867 Serial Interface Module The TIP867 is an IndustryPack® compatible module and offers eight channels of high performance RS485 serial interface. Each channel has a 4 byte transmit FIFO and an 8 byte receive FIFO to significantly reduce the overhead required to provide data to and get data from the transmitters and receivers. The TIP867 supports Dx+, Dx- and GND for each of the eight RS485 channels. The baud rate is individually programmable up to 2Mbps. The TIP867 uses ESD protected transceivers (up to +/-15KV according to IEC 1000-4-2). All transition modules of the TIP866 series are well suited for the TIP867. The transition module TIP866-TM-10 provides 8 DB-9 connectors mounted in a 6U 8TE front panel. The transition module TIP866-TM-20 offers 8 RJ45 connectors mounted in a 6U 4TE front panel. The transition module TIP866-TM-30 provides 16 4-pin RJ connectors mounted in a 6U 4TE front panel. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Serial Controller |
Z85230 |
| Number of Channels |
8 |
| I/O Signals per Channel |
TxD+/-, RxD+/-, CLK+/- (TIP867-20 only) |
| Clock Frequency |
PCLK 8MHz, RTxC 7.3728MHz, TRxC external I/O CLK maximum 2MHz (TIP867-20) |
| FIFO |
8 byte receive FIFO, 4 byte transmit FIFO per channel |
| Physical Interface |
Half Duplex RS485 Interface |
| ESD Protection |
+/-15V Human Body Model |
| Transfer Rate |
TIP867-10: up to 500kbaud TIP867-20: up to 2Mbaud using external CLK |
| Wait States |
IDPROM access: no wait states SCC access: 1 wait state Interrupt vector read: 3 wait states |
|
Power Requirements |
|
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
702715h |
Manuals
TIP867 |
Data Sheet |
TIP867-DOC |
User Documentation for TIP867 |
TIP867-SW-32 |
pSOS Software Support for TIP867 |
TIP867-SW-42 |
VxWorks Software Support for TIP867 |
|
|