Skip to content

Sections
Home Processors I/O About Us News Support
Personal tools
You are here: Home → Product Catalog → TIP866-TM-10

TIP866-TM-10

Transition Module (8 x DB25) for TIP866/867
TIP866-TM-10

The TIP866-TM-10 is a transition module for the serial interfaces TIP866 and TIP867.

The transition module supports all versions of the TIP866 (RS232, RS422 and TTL-Level interfaces), the TIP867 (RS485 interface) and all versions of the IP-Octal.

Eight DB25 female connectors are mounted in a 6U 8TE EMV front panel.

The transition module supports TXD, RXD, RTS, CTS and GND for each of the eight channels of the TIP866-10/11 (RS232 / TTL-Level). TxD+/-, RxD+/-, GND are supported for the TIP866-20 (RS422) and Dx+/-, GND for the TIP867-10 (RS485).

Each serial channel can be configured by jumper as DTE or DCE.

On board termination is provided for RS422/RS485. Termination can be activated by jumper.

A 2 pin terminal block on the transition module can be used to provide +5V to each of the eight DB25 connectors (pin 9) and to supply the on board termination for RS422/ RS485. Support of the +5V is selectable by jumper for each serial channel. The +5V is fuse protected by a 1A multi-fuse.