TIP866
TIP866 8 Channel RS232 or RS422 Serial Interface
|
|
| TIP866 Serial Interface Module TIP866 is an IndustryPack® compatible module providing eight channels of high performance serial interface. Three different modules are available. The TIP866-10 provides RS232 interface, the TIP866-11 offers TTL level interface and the TIP866-20 provides RS422 interface. Each channel has a 64 byte transmit FIFO and a 64 byte receive FIFO to significantly reduce the overhead required to provide data to and get data from the transmitters and receivers. The FIFO trigger levels are programmable. The TIP866-10 and -11 support RxD, TxD, RTS, CTS and GND for each of the eight RS232 channels. The TIP866-20 supports RxD+/-, TxD+/- and GND for each of the eight RS422 channels. The baud rate is individually programmable up to 115.2kbaud for the TIP866-10 and up to 460.8kbaud for the TIP866-11 and -20. The TIP866-10 and -20 use ESD protected transceivers (up to +/-15KV according to IEC 1000-4-2. The transition module TIP866-TM-10 provides 8 DB-25 connectors mounted in a 6U 8TE front panel. The TIP866-TM-20 provides 8 RJ45 connectors mounted in a 6U 4TE front panel. The TIP866-TM-30 provides 16 4-pin RJ connectors mounted in a 6U 4TE front panel. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Channels |
8 |
| I/O Signals |
TIP866-10 (RS232) and TIP866-11 (TTL): TxD, RTS, RxD, CTS, GND DTR, DSR, DCD, RI additionally for channel 1 and channel 2 TIP866-20 (RS422): TxD+/-, RxD+/- and GND |
| Termination |
120ohms between RxD+ and RxD- of TIP866-20 |
| ESD Protection |
RS232/422 Transmitter: +/-6kV IEC1000-4-2, contact discharge +/-15kV IEC1000-4-2, air gap discharge RS232/422 Receiver: +/-8kV IEC1000-4-2, contact discharge +/-15kV IEC1000-4-2, air gap discharg |
| Serial Controller |
Two ST16C654 (Quad UART) |
| FIFO |
64 byte transmit FIFO, 64 byte receive FIFO per channel |
| Baud Rates |
Each channel individually programmable up to 115.2kbaud for RS232 interface and up to 460,8kbaud for RS422 and TTL interface |
| Wait states |
No wait states |
| Interrupts |
Vectored interrupts, INTREQ0 for channel 1-4, INTREQ1 for channel 5-8s |
| Power Requirements |
40mA typical @ +5V (no serial channels connected) 1mA typical @ -12V (no serial channels connected) 1mA typical @ +12V (no serial channels connected) |
| Temperature Range |
Operating 0°C to +70°C Storage -40°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
714778 h for TIP866-10 667498 h for TIP868-20 |
Manuals
 TIP866 |
Data Sheet |
| TIP866-DOC |
User Documentation for TIP866 |
| TIP866-SW-12 |
OS-9 Software Support for TIP866 |
| TIP866-SW-32 |
pSOS Software Support for TIP866 |
| TIP866-SW-42 |
VxWorks Software Support for TIP866 |
| TIP866-SW-62 |
OS-9 Software Support for TIP866 |
| TIP866-SW-92 |
pSOS Software Support for TIP866 |
| TIP866-SW-95 |
VxWorks Software Support for TIP866 |
|
|
The New XycomVME Group
