TIP865
TIP865 4 Channel RS232, RS422 or RS485 Serial Interface
|
|
| TIP865 Serial Interface Module The TIP865 is an IndustryPack® compatible module with four channels of high performance multimode serial interface. Four different modules are available. The TIP865-10 offers four RS232 interfaces, the TIP865-11 provides four TTL interfaces, the TIP865-20 supports four RS422 interfaces and the TIP865-30 provides four RS485 interfaces. The full modem control is available for each of the 4 serial interfaces on the TIP865-10 and -11 supporting RxD, TxD, RTS, CTS, DCD and clock. The TIP865-20 provides RxD+/-, TxD+/- and clock. The TIP865-30 supports a bidirectional RS485 bus. The baud rate is individually programmable up to 2Mbaud. The TIP865-30 supports baud rates of up to 4Mbaud. The TIP865 supports asynchronous and synchronous protocols. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Termination |
TIP865-10: no termination TIP865-11: no termination TIP865-20: supports receive and transmit termination TIP865-30: a standard RS485 termination available |
| I/O Signals |
TIP865-10 (RS232): TxD, RTS, DTR, RxD, CTS, DSR, DCD Clock (in and out) TIP865-11 (TTL): TxD, RTS, DTR, RxD, CTS, DSR, DCD Clock (in and out) TIP865-20 (RS422): TxD, RxD, CLKIN, CLKOUT TIP865-30 (RS485): TxD/RxD+, TxD/RxD- |
| Wait States |
IDPROM: no wait states Serial communication controller (SCC): 1 wait state Interrupt vector read: 2 wait states |
| Interrupts |
Vectored interrupts |
| Power Requirements |
200mA typical @ +5V (measured with I/O pins not connected) |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
1039682 h |
Manuals
TIP865 |
Data Sheet |
TIP865-DOC |
User Documentation for TIP865 |
TIP865-SW-12 |
OS-9 Software Support for TIP865 |
TIP865-SW-32 |
pSOS Software Support for TIP865 |
TIP865-SW-42 |
VxWorks Software Support for TIP865 |
|
|