TIP830

Sections

Home

Processors

I/O

About Us

News

Support

Personal tools

TIP830

TIP830 8 Channel 12/16-bit Simultaneous Sampling A/D

TIP830 Analog Module

The TIP830 family are IndustryPack® compatible modules with 8 independent channels of high resolution 12 bit or 16 bit analog-to-digital conversion. Each channel consists of a Sample and Hold and a 12 bit or 16 bit A/D converter. The maximum time for sample and convert is 25µs for all channels. The full-scale input range is +/-10V.

A start-of-conversion is initiated by software command or via the trigger I/O pin. All eight channels of the TIP830 sample and convert simultaneous.

By connecting the trigger I/O pins of several modules it is possible to expand the simultaneous sample and convert feature to several TIP830 modules.

Technical Specifications

Logic Interface	IndustryPack® Logic Interface
Size	Single Size IP
I/O Interface	50-conductor flat cable
Analog Inputs	8 channels, each with independent Sample and Hold and ADC
Input Voltage Range	+/-10V
Input Impedance	45kohms
ADC Resolution	TIP830-10: 12 bit (ADS7806) TIP830-20: 16 bit (ADS7807)
Integral Linearity Error	TIP830-10: maximum +/-0.9LSB TIP830-20: maximum +/-3LSB
Bipolar Zero Error	+/-10mV maximum before data correction
Temperature Drift	+/-0.5ppm/°C
Conversion Time	25µs maximum for sample and convert, all channels converting simultaneously
Throughput Rate	40k samples per second
Data Correction	Factory calibration data for gain and offset correction in IDPROM
External Trigger	TTL level open collector external trigger I/O pinl
Wait States	ADC data read: 1 wait state All other accesses: no wait statest
Power Requirements	130mA typical @ +5V 18mA typical @ +12V
Temperature Range	Operating 0°C to +85°C Storage -45°C to +125°C
Humidity	5 - 95% non-condensing
MTBF

Manuals

TIP830	Data Sheet
TIP830-DOC	User Documentation for TIP830
TIP830-SW-32	pSOS Software Support for TIP830
TIP830-SW-82	LiNUX Software Support for TIP830