TIP551
TIP551 4 Channel Isolated 16-bit D/A
|
| TIP551 Analog Module The TIP551 is an IndustryPack® compatible module and it offers 4 channels of isolated 16 bit analog outputs. Settling time to 0.003% is 10µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The DAC clears to 0V in both unipolar and bipolar output. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP551 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Analog Outputs |
4 channels |
| Isolation |
All D/A channels are galvanically isolated from the IP interface |
| Output Voltage Range |
+/-10V or 0V to 10V (selectable by jumper) Common for all 4 channels |
| Setting Time of DAC |
To 0.003% 10µs typical |
| Calibration Data |
In ID-PROM for gain and offset correction for each channel |
| Output Current |
+/-4mA for each channel |
| Load Capacitance |
1nF typical |
| Accuracy |
INL +/-4LSB typical after calibration |
| Linearity |
DNL +/- 1LSB |
| Monotonicity |
16 bit over the specified temperature range |
| Wait states |
IDSEL: 1 wait state IOSEL: no wait states |
| Power Requirements |
400mA typical @ +5V, no load 430mA typical @ +5V with 4mA output current for each channel |
| Temperature Range |
Operating -40°C to +85°C Storage -45°C to +125° C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
283318 h |
Manuals
 TIP551 |
Data Sheet |
| TIP551-DOC |
User Documentation for TIP551 |
| TIP551-SW-32 |
pSOS Software Support for TIP551 |
| TIP551-SW-42 |
VxWorks Software Support for TIP551 |
| TIP551-SW-62 |
Windows NT 4.0 Software Support for TIP551 |
|
|
The New XycomVME Group
