TIP500
TIP500 16 Channel Isolated 12-bit A/D
|
|
| TIP500 Analog Module The TIP500 is an IndustryPack® compatible module with 16 single-ended or 8 differential channels of isolated 12 bit A/D conversion. The data acquisition and conversion time is up to 10µs without channel / gain change and up to 12.5µs with channel / gain change. The input multiplexer offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP500-1x and 0-10V for the TIP500-2x. The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP500 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Analog Inputs |
16 single-ended channels or 8 differential channels |
| Input Isolation |
All channels are galvanically isolated from the IP interface DC/DC converter on board |
| Input Gain Amplifier |
TIP500-10 / TIP500-20: programmable for gain 1, 2, 5, 10 TIP500-11 / TIP500-21: programmable for gain 1, 2, 4, 8 |
| Input Voltage Range |
TIP500-10 +/- 10V (gain = 1) +/- 5V (gain = 2) +/- 2V (gain = 5) +/- 1V (gain = 10) TIP500-20 0V to 10V (gain = 1) 0V to 5V (gain = 2) 0V to 2V (gain = 5) 0V to 1V (gain = 10) TIP500-11 +/- 10V (gain = 1) +/- 5V (gain = 2) +/- 2.5V (gain = 4) +/- 1.25V (gain = 8) TIP500-21 0V to 10V (gain = 1) 0V to 5V (gain = 2) 0V to 2.5V (gain = 4) 0V to 1.25V(gain = 8) |
| Input Overvoltage |
Up to 70Vpp |
| Input ADC |
12 bit ADC; data acquisition and conversion time up to 10µs without channel / gain change and up to 12.5µs with channel / gain change (mode-dependent) |
| Calibration Data |
In ID-PROM for gain and offset correction |
| Accuracy |
+/- 1LSB for all TIP500 modules after calibration |
| Linearity |
+/- 1LSB for all TIP500 modules |
| Wait states |
IDSEL: 1 wait state IOSEL: no wait states INTSEL: no wait states |
| Power Requirements |
310mA typical @ +5V |
| Temperature Range |
Operating -40°C to +85°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
302112 h |
Manuals
 TIP500 |
Data Sheet |
| TIP500-DOC |
User Documentation for TIP500 |
| TIP500-SW-32 |
pSOS Software Support for TIP500 |
| TIP500-SW-42 |
VxWorks Software Support for TIP500 |
| TIP500-SW-62 |
Windows NT 4.0 Software Support for TIP500 |
| TIP500-SW-82 |
LiNUX Software Support for TIP500 |
| TIP500-SW-95 |
QNX 6 Software Support for TIP500 |
|
|
The New XycomVME Group
