TIP250
TIP250 8 MB Flash Memory
|
|
TIP250 8 MB Flash Memory
The TIP250 is an IndustryPack compatible module that offers an easy and reliable way to implement 8 Mbytes of Flash memory. The TIP250 is ideal for holding application code, operating system software or data. Two AM29LV033 devices (32Mbit, x8 organized) are used to provide 1 bank of 8 Mbytes (16 bit wide) Flash memory which is divided into 64 sectors of 128 Kbytes (16 bit wide). Accesses to the TIP250 Flash memory occur within the IP memory space. After power-on the TIP250 comes up in read only mode. The IP I/O space holds the Flash Control Register and the interrupt vector register. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| Flash Chip |
2 x AM29LV033, 90 ns, TSOP package |
| SRAM Memory Capacity |
8 Mbytes FLASH Memory 1 bank of 8 Mbytes (16 bit wide) bank offers 64 sectors of 128 Kbytes (16 bit wide) |
|
Erase and Program Cycle |
Guaranteed min. erase and program cycle endurance: 1.000.000 cycles |
|
Erase Time |
45 s typical bank 0.7 s typical sector |
|
Programming time |
9 µs typical word 36 s typical bank |
|
Wait States |
Memory Read: 1 wait state All others: no wait states |
|
Interrupts |
IntReq0 on program / erase cycles |
|
Power Requirements |
+5V only, on board +3.3V generation 160mA typical @ +5V DC |
| Temperature Range |
Operating -40°C to +85°C Storage -55°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
406963 h |
| Connections |
No connections to IP-I/O connector |
Manuals
 TIP250 |
Data Sheet |
| TIP250-DOC |
User Documentation for TIP250 |
| TIP250-SW-32 |
pSOS Software Support for TIP250 |
| TIP250-SW-42 |
VxWorks Software Support for TIP250 |
|
|
The New XycomVME Group
