Skip to content

Sections
Home Processors I/O About Us News Support
Personal tools
You are here: Home Product Catalog MVME147, 162, 172

MVME147, 162, 172

Motorola has announced the EOL (End of life) on the MVME162, MVME172, and MVME147 VME components. XycomVME has these boards available for ordering. The supply of these end of life boards is limited so please call now to ensure available stock and prompt delivery.

MVME147MVME162MVME172
  • MVME147-013A
  • 16, 25, or 33.33 MHz MC68030 enhanced 32-bit microprocessor
  • 16, 25, or 33.33 MHz MC68882 floating-point co-processor
  • 4, 8, 16, or 32MB of shared DRAM, with programmable parity
  • 4K x 8 SRAM and time-of-day clock with battery backup
  • Four 28/32-pin ROM/PROM/EPROM/EEPROM sockets, 16 bits wide
  • A32/D32 VMEbus master/slave interface with system controller function
  • Four EIA-232-D serial communications ports
  • Centronics compatible printer port
  • Two 16-bit timers and watchdog timer
  • SCSI bus interface with DMA
  • Ethernet transceiver interface
  • 4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus
  • On-board debugger and diagnostic firmware
  • MVME162PA-252SE
  • 25 MHz MC68040 with floating-point coprocessor
  • High-performance DMA, supports VMEbus D64 and local bus memory burst cycles
  • 32MB of configurable SDRAM with ECC option
  • 128KB of SRAM with battery backup
  • 1MB of Flash memory
  • 8K x 8 NVRAM and time-of-day clock with battery backup
  • Four serial communication ports, configured as EIA-232-D DTE
  • Two 16-bit or one 32-bit IndustryPack ports with one DMA channel per port
  • Six 32-bit timers, one watchdog timer
  • One SCSI interface
  • One Ethernet interface
  • Two 32-pin JEDEC DIP sockets for EPROM
  • Remote Reset/Abort/Status control functions
  • On-board debugger and diagnostic firmware
  • MVME172PA-652SE
  • 60 MHz MC68060
  • 32MB of configurable SDRAM with ECC option
  • 128KB SRAM with battery backup
  • 2MB of Flash memory
  • 8K x 8 NVRAM and time-of-day clock with battery backup
  • Four serial communication ports, configured as EIA-232-D DTE
  • Two 16- or one 32-bit IndustryPack ports with one DMA channel per port
  • Six 32-bit timers, one watchdog timer
  • SCSI and Ethernet interfaces
  • Two 32-pin JEDEC DIP sockets for EPROM
  • Remote Reset/Abort/Status control functions
  • On-board debugger and diagnostic firmware